Click here to go to the Catalogue

Scotland 01236 431 857

Export +44 (0)1482 649 665

England & Wales 0115 982 1111

Moldex Fit Testing Kit

N1 

   

The Approved Code of Practices supporting COSHH, CAR and CLAW stipulate that tight-fitting RPE MUST be fit tested as part of the selection 
process.The performance of tight-fitting face pieces depends on achieving a good contact between the wearers skin and the face seal of the 
face piece. Inadequate fit will significantly reduce the protection provided. Any reduction in protection can put the wearers life in danger or 
may lead to immediate or long-term ill health. There are two main reasons for doing Bitrex testing. 

Firstly to make sure that the respirator itself is suited for the wearers particular face shape. Secondly to make sure that the respirator is 
fitted correctly to get a tight seal and ensure safety against hazards in the workplace. It is important to remember it is the suitability of the 
respirator that is being tested.
Each kit is suitable for carrying out multiple tests and come packaged in their own sturdy case, all kits come with a FREE Fit Test CD, to help 
employers understand more about Fit Testing, the requirements and how to carry out tests.

Fit Testing Kit Contains: 1x Hood, 1x Bitrex Sensitivity Solution,1x  Bitrex Test Solution, 2 x Nebulisers, 1x Fit test instruction CD

Code

Description

SAF6433 10301 Fit Testing Kit

SAFETY

, RESPIRA

TORS

SAFETY, RESPIRATORS

3M Face Masks, 6000 Series

S5-222

   

The twin filter 6000 Series is lightweight, easy to use, maintenance free and gives extra 
comfort as the facepiece is supplied in three different sizes.   The facepieces have been tested 
to EN140, the 2000 series filters to EN143 and the 6000 series filters to EN141

Facepieces

 

   

Code

Description

Pack

SAF6140 Small

Each

SAF6142 Medium

Each

SAF6144 Large

Each

Filters

   

Code

 Description 

Pack

SAF6146 Organic vapours A1

8

SAF6148 Ammonia K1

8

SAF6150 Organic vapours A2

8

SAF6152 Gas/vapours ABEI

8

SAF6154 Particulate 12 x OEL

20

SAF6156 Ozone 10 x OEL

20

SAF6158 Particulate 50 x OEL

20

SAF6160 Acid Gas - OEL

20

SAF6162 Vapours - OEL

20

Disposable, 3M

S5-222 

   

A range of disposable respirators manufactured by 3M, each type is designed to offer 
protection against specific airborne contaminants, e.g. dust, pollen, aerosol mists, organic 
vapours, fibres and unpleasant smells. For detailed specification and conformity to Health 
and Safety Executive Approved Standards (HSE), please contact our Sales Office.

Code

Contaminant 

Type 

Relevant 

Standard

Pack

SAF6102 Fine dusts and fibres

EN149 FFP1

20

SAF6104 Dusts, mists, organic vapours 

and unpleasant smells

EN149 FFP2

20

SAF6106 Fine toxic dusts, fibres, mists 

and metal fumes

EN149 FFP3SL

5

740