Click here to go to the Catalogue
Scotland 01236 431 857
Export +44 (0)1482 649 665
England & Wales 0115 982 1111
Accessories
E40-43
WASHERS
WASHERS
Half Inserts Narrow Neck
Half inserts for narrow-necked glassware which do not require direct injection (e.g. flasks,
graduated cylinders, bottles, etc.)
E 106 half insert
28 spring clips to secure glassware:
10 spring clips 175mm high
18 spring clips 105mm high
Distance between clips: approx. 60mm
Insert measurements: 186 x 195 x 430mm (HWD)
For use in lower or half injector baskets only
E 106/1 half insert
28 small spring clips to secure glassware (105mm high)
Distance between clips approx. 60mm
Insert measurements: 116 x 195 x 410mm (HWD)
For use in upper, lower or half injector baskets
E 106/2 half insert
15 large spring clips to secure glassware (175mm high)
Distance between clips approx. 85mm
Insert measurements: 286 x 180 x 420mm (HWD)
For use in lower basket or half injector baskets only
Code
Description
WAS6068 E 106 half insert
WAS6070 E 106/1 half insert
WAS6072 E 106/2 half insert
Half Inserts Other Glassware
Half inserts for beakers, flasks and various other glassware which do not require direct
injection.
E 109 half insert
For 21 beackers (up to 250ml) or other glassware.
3 rows of 140mm tall paired holders
Insert measurements: 155 x 230 x 460mm (HWD)
For use in lower or half injector baskets only
E 110 half insert
For 10 beakers (250 to 600ml) or other glassware
2 rows of 160mm tall paired holders
Insert measurements: 175 x 230 x 460mm (HWD)
For use in lower or half injector
E 111 half insert
For 8 beakers (600 to 1000ml) or other glassware
4 rows of 190mm holders (24 total)
Inserts measurements: 205 x 230 x 460mm (HWD)
For use in lower or half injector baskets only
E 144 half insert
For 18 beakers (up to 250ml)
3 rows of 120mm tall paired holders
Insert measurements: 131 x 200 x 445mm (HWD)
For use in upper, lower or half injector baskets
AK 12 half insert
Half insert basket with handles, for beakers, bottles and various other glassware which
do not require direct injection. Thsi insert is also ideal for miscellaneous labware (e.g.
funnels, stirrers, stopcocks, etc.).
Insert measurements: 67 x 225 x 442mm (HWD). Allow additional 60mm for height of
handles
For use in upper, lower or half injector baskets
Code
Description
WAS6074 E 109 half insert
WAS6076 E 110 half insert
WAS6078 E 111 half insert
WAS6080 E 144 half insert
WAS6066 AK 12 half insert
1014