Click here to go to the Catalogue
Scotland 01236 431 857
Export +44 (0)1482 649 665
England & Wales 0115 982 1111
Bag Ties
C10-1
Code
Description
BAG1080 Bag Ties Plastic/Wire 152mm Pack 1000
BAG1082 Bag Tie Plastic/Wire on a Reel 460M
Bin Bags
C10-1
Code
Description
Pack
BIN1022 Black polythene dustbin liner, 90 litre capacity
200
BAGS
BAGS
Whirl Pak Instructions
Whirl-Pak Flat Wire Bags
C10-1
Whirl-Pak transparent sample bags are sterile, disposable, and economical. They are constructed of durable polyethylene and provide a safe,
spill-free use for liquid, semisolid, and solid samples. The bags are opened easily by tearing along a perforation. The samples are placed into
the bag, whihc is then securely fastened by folding or whirling shut. The use of one wire creates a thick closure.
Features include:
Write-on strip and use an ordinary ballpoint pen or pencil
Unique puncture-proof tabs - the tape on the tab extends past the wire end, eliminating sharp points that may puncture bags or cause
damage to skin or gloves
Stand-up bags feature a gusset on the bottom that flattens out when the sample is placed inside, allowing the bag to stand up by itself
without the need for racks or special holders
Code
Description
Capacity, mL
Size, mm
Write on Panel Pack
BAG2550 Whirl-Pak Bags with Flat Wire
118
75 x 185
Yes
500
BAG2552 Whirl-Pak Bags with Flat Wire
532
115 x 230
Yes
500
1. Tear off top of bag
along perforation
4b. Or, fold the tab over
tightly three times to close
2. Use pull tabs to open
bag
5. Bend wire ends onto
bag
3. Place sample in bag
not more than 2” (5.1cm)
from the top
4a. Hold bag by wire ends
and whirl three times or
more to close
Closing / Opening the bags
Whirling the bag as shown in Figure 4a will form the tightest seal
Folding the tab over as shown in Figure 4b is used to close larger bags
To open the bag, bend the wire ends away from the bag, unroll the tab
and use pull tabs to open
28