Click here to go to the Catalogue
ask@scientific-labs.com
www.scientificlabs.co.uk
Anaerobic Jar, Oxoid
C10-51
Holds up to 12 petri dishes. Supplied with: - polycarbonate jar of 3.5 litre capacity, ‘O’ ring, self centering cast lid and clamp, in-put and out-put
Schrader valves, automatic safety valve and pressure gauge, Oxoid low temperature catalyst, plate carrier and tube carrier.
Please note:
1. Schrader valve chucks and clips are required for connection to vacuum pump and gas cylinder.
2. It is recommended that the catalyst be changed every 30 cycles. The low temperature catalyst has been designed to stay cooler than traditional
catalyst.
Anaerogen is a kit for use with the Anaerobic jar. It produces an anaerobic atmosphere rapidly without the use of water or catalyst. No hydrogen
is produced. The oxygen is absorbed rapidly without build up of pressure. The final atmosphere contains less than 1% oxygen supplemented with
carbon dioxide - ideal for optimum growth of anaerobes and increased colony size.
Code
Description
Pack
ANA1000 Oxoid Anaerobic Jar
Each
Spares & Accessories
Code
Description
Pack
ANA1046 Anaerogen Gas Kit for 3.5L
10
ANA1005 Schrader valve chuck and clip
2
ANA1016 Anaerobic indicator (Reazurin)
100
ANA1020 Low temperature catalyst
5
ANA1036 ‘O’ Rings
5
Anaerojar™, Oxoid
C10-51
Atmospheric Generation System. The 2.5L jar will hold up to 12 disposable plastic petri dishes. The jar’s polycarbonate base is secured to the
lid by four spring loaded clips. The clips themselves allow self-venting in the unlikely event of a pressure build up. A carrying handle is also
provided, enabling the jar to be transported safely between the bench and the incubator.
An easy to operate vacuum relief screw permits the inlet of air to the jar, thus overcoming any difficulty which could be caused by the presence
of negative pressure.
The Anaerojar is lightweight and robust with excellent space saving features; there are no external clamps or protruding valves and the
carrying handle tucks away into the lid of the jar itself.
Anaerogen is a kit for use with the Anaerojar. It produces an anaerobic atmosphere rapidly without the use of water or catalyst. No hydrogen
is produced. The oxygen is absorbed rapidly without build up of pressure. The final atmosphere contains less than 1% oxygen supplemented
with carbon dioxide - ideal for optimum growth of anaerobes and increased colony size.
Code
Description
Pack
ANA1040 Anaerojar PC 2.5L
Each
Accessories for Anaerojars™
A wide range of Oxoid and Difco media are available, full catalogues available on request
Code
Description
Pack
ANA1044 Anaerogen Gas Kit for 2.5L
10
ANA1037 CampyGen Gas Generator Kit
10
ANA1050 Jar Base
Each
ANA1056 Jar Plate Carrier
Each
ANA1058 Jar ‘O’ Ring
5
ANAEROBIC
ANAEROBIC
3