Carbolite CWF Chamber Furnace
Carbolite CWF Chamber furnaces incorporate two free radiating coiled wire elements mounted in hard wearing high quality ceramic liners
situated on either side of the chamber. As a result, these furnaces reach working temperature in approximately 50% of the time required
by a traditional covered element "muffle" design, saving time and using less power.
Chamber sizes are 5, 13, and 23 litres with maximum temperatures of 1100, 1200, or 1300°C.
Flexibility through 3 sizes, 3 maximum temperatures & several temperature controllers/temperature programmers
Ext Dimensions (HxWxD)
Int Dimensions (HxWxD)
Max temp, °C
FUR1205 Furnace CWF 11/5 with PID 301 controller
FUR1207 Furnace CWF 11/13 with PID 301 controller
FUR1209 Furnace CWF 11/23 with PID 301 controller
FUR1210 Furnace CWF 12/5 with PID 301 Controller
FUR1218 Furnace CWF 12/13 with PID 301 Controller
FUR1226 Furnace CWF 12/23 with PID 301 Controller
FUR1229 Furnace CWF 13/5 with PID 301 controller
FUR1231 Furnace CWF 13/13 with PID 301 controller
FUR1233 Furnace CWF 13/23 with PID 301 controller
Carbolite RWF Rapid Heating Chamber Furnace
The Carbolite RWF Rapid Heating furnace incorporates free radiating coiled wire elements in three sides of the furnace chamber which is
constructed from rigidised low thermal mass insulation whilst a hard dust-free ceramic hearth provides a robust base to the chamber. As a
result of this design the heat up times from ambient to 1100°C are achieved in as little as 10 minutes.
Chamber sizes are 5, 13, and 23 litres with maximum temperatures of 1100 or 1200 °C.
High power design for fast heat up
Ext Dimensions (HxWxD) mm
Int Dimensions (HxWxD) mm
FUR1235 Furnace RWF 11/5 with PID 301 Controller
FUR1237 Furnace RWF 11/13 with PID 301 Controller
FUR1239 Furnace RWF 11/23 with PID 301 Controller
FUR1240 Furnace RWF 12/5 with PID 301 Controller
FUR1248 Furnace RWF 12/13 with PID 301 Controller
FUR1256 Furnace RWF 12/23 with PID 301 Controller