Click here to go to the Catalogue
Scotland 01236 431 857
Export +44 (0)1482 649 665
England & Wales 0115 982 1111
Moldex Fit Testing Kit
N1
The Approved Code of Practices supporting COSHH, CAR and CLAW stipulate that tight-fitting RPE MUST be fit tested as part of the selection
process.The performance of tight-fitting face pieces depends on achieving a good contact between the wearers skin and the face seal of the
face piece. Inadequate fit will significantly reduce the protection provided. Any reduction in protection can put the wearers life in danger or
may lead to immediate or long-term ill health. There are two main reasons for doing Bitrex testing.
Firstly to make sure that the respirator itself is suited for the wearers particular face shape. Secondly to make sure that the respirator is
fitted correctly to get a tight seal and ensure safety against hazards in the workplace. It is important to remember it is the suitability of the
respirator that is being tested.
Each kit is suitable for carrying out multiple tests and come packaged in their own sturdy case, all kits come with a FREE Fit Test CD, to help
employers understand more about Fit Testing, the requirements and how to carry out tests.
Fit Testing Kit Contains: 1x Hood, 1x Bitrex Sensitivity Solution,1x Bitrex Test Solution, 2 x Nebulisers, 1x Fit test instruction CD
Code
Description
SAF6433 10301 Fit Testing Kit
SAFETY
, RESPIRA
TORS
SAFETY, RESPIRATORS
3M Face Masks, 6000 Series
S5-222
The twin filter 6000 Series is lightweight, easy to use, maintenance free and gives extra
comfort as the facepiece is supplied in three different sizes. The facepieces have been tested
to EN140, the 2000 series filters to EN143 and the 6000 series filters to EN141
Facepieces
Code
Description
Pack
SAF6140 Small
Each
SAF6142 Medium
Each
SAF6144 Large
Each
Filters
Code
Description
Pack
SAF6146 Organic vapours A1
8
SAF6148 Ammonia K1
8
SAF6150 Organic vapours A2
8
SAF6152 Gas/vapours ABEI
8
SAF6154 Particulate 12 x OEL
20
SAF6156 Ozone 10 x OEL
20
SAF6158 Particulate 50 x OEL
20
SAF6160 Acid Gas - OEL
20
SAF6162 Vapours - OEL
20
Disposable, 3M
S5-222
A range of disposable respirators manufactured by 3M, each type is designed to offer
protection against specific airborne contaminants, e.g. dust, pollen, aerosol mists, organic
vapours, fibres and unpleasant smells. For detailed specification and conformity to Health
and Safety Executive Approved Standards (HSE), please contact our Sales Office.
Code
Contaminant
Type
Relevant
Standard
Pack
SAF6102 Fine dusts and fibres
EN149 FFP1
20
SAF6104 Dusts, mists, organic vapours
and unpleasant smells
EN149 FFP2
20
SAF6106 Fine toxic dusts, fibres, mists
and metal fumes
EN149 FFP3SL
5
740