Click here to go to the Catalogue
ask@scientific-labs.com www.scientificlabs.co.uk
Eppendorf Mastercycler
®
nexus X2
E39-20
The new Mastercycler nexus X2 from Eppendorf enables users to run two totally independent protocols at the same time. Smaller assays
fit nicely on the 32-well-block whilst larger assays can run simultaneously on the 64-well-block, the 64 well block is also available with
a gradient function. As every member of the Mastercycler nexus family, the Mastercycler nexus X2 can be combined with all other family
members in a network of up to 3 units allowing you to install the best solution for your needs and benefit from common software across
all PCR devices.
Key features and benefits include:
Large block for large assays / small block for small assays.
Universal block for strips, 0.2 mL and 0.5 mL PCR tubes
Intuitive graphic programming (optional mouse use)
Optional gradient on large block for PCR optimization
E-mail notification
Combine up to 3 units to maximise throughput
*e versions need to be used with an X2 or GX2 unit
Technical Specifications
Model
Gradient
Capability
Gradient °C
Gradient
Range °C
Temeprature
Range °C
Heating Rate
°C/sec
Cooling Rate
°C/sec
Block Temperature
Accuracy °C
Lid
Temperature °C
Dimensions (W x D
x H) mm
X2
n/a
-
-
4-99
~3
~2
±0.2
37-110
250 x 412 x 330
GX2
Y
30-99
12
4-99
~3
~2
±0.2
37-110
250 x 412 x3 30
Code
Description
E6337000043 nexus X2
E6336000040 nexus GX2
E6338000047 nexus X2e*
E6339000040 nexus GX2e
THERMAL CY
CLERS
THERMAL CYCLERS
Eppendorf Temperature Validation System
E39-20
The Temperature Validation System for the entire Mastercycler family enables simple and
rapid validation and calibration of block temperature.
Key features:
Sensor for 0.2mL tube position
Optional: sensor for 384 well block, sold separately
Simple, rapid validation and calibration
Autocalibration with Mastercycler software, version 2.10 or higher
Can be third party calibrated
Code
Description
E0055000298 Temperature Validation System
Eppendorf PCR Cooler
C10-20
The Eppendorf PCR-Cooler contains a temperature indicator that changes the colour of the
PCR-Cooler from violet to pink or dark blue to light blue when its temperature exceeds 7
°C. The Eppendorf PCR-Cooler is ideal for setting up PCR reactions in 0.2 mL and 0.5 mL
PCR tubes as well as 96-well PCR plates.
Keeps samples at 0°C for more than an hour with two-hour pre-cooling at -20°C
Temperature increase is indicated by colour change: violet or dark blue when ice cold,
pink or light blue above 7
o
C
Special cone contour prevents freezing
The temperature of each individual well is indicated by its colour
96-well format, 0.2mL and 0.5mL reaction tubes/PCR tubes, tube strips and PCR plates
Code
Description
E3881000015 PCR Cooler Starter Set (1 pink, 1 blue)
E3881000023 PCR Cooler Pink
E3881000031 PCR Cooler Blue
891